IQ Battery 10C
IQBATTERY-10C-1P-NA
10 kWh of storage for daily energy use and backup.

Store solar for later. Keep power ready.
IQ Battery 10C stores 10 kWh of energy using lithium iron phosphate cells and four built-in microinverters. Use stored power at home and track solar, batteries and energy use in the Enphase App.
Energy for your home
Each unit stores 10 kWh and supplies 7.08 kW continuously. We size the system around your daily use and what you want to keep running.
Use more of your solar
Store electricity from your panels for use when solar production falls or household demand rises.
Power during an outage
Backup controls disconnect the home from the grid so the battery can supply your selected circuits.
Adding to existing solar
Supported existing solar systems can add Enphase storage. We check your inverter, controls and utility requirements before planning the addition.
Model details.
Battery capacity (kWh) is stored energy. Power output (kW) determines what can run at once. Runtime depends on your loads and reserves.
| Specification | Value |
|---|---|
| Battery model | IQBATTERY-10C-1P-NA |
| Usable capacity | 10.0 kWh · operating reserves apply |
| Continuous discharge power | 7.08 kW |
| Continuous AC output rating | 7.08 kVA |
| Rated output current | 29.5 A at 240 V |
| Peak output current | 56 A for 3 seconds |
| Chemistry | Lithium iron phosphate · LFP |
| Architecture | AC-coupled · embedded grid-forming microinverters |
| Nominal voltage | 120/240 V · single phase |
| Dimensions · H × W × D | 621 × 708 × 365 mm |
| Installed weight | 144 kg / 317 lb |
| Warranty limit | Earlier of 15 years or 6,000 discharged cycles |
| End-of-term capacity coverage | 60% · warranty terms apply |
Where it fits.
- Homes that want to use more stored solar day to day
- New solar systems using Enphase storage and controls
- Supported existing solar systems adding battery backup
Designed around your home.
- Installed solar and battery models
- Required controls, metering and communications
- Circuit loads, reserves and warranty registration
What’s covered.
15 years or 6,000 discharged cycles, whichever comes first, with 60% retained capacity. Registration and installation conditions apply. See Enphase’s limited warranty.
Installation and service coverage are in your Sunstorm agreement.
Common questions.
Does 10kWh mean ten hours of backup?
No. Runtime depends on what is running, battery reserves, conditions and solar recharge.
Can I add it to my existing solar?
It supports compatible existing solar systems, including some using other inverter brands. We check your equipment and the required controls first.
Can I mix it with older Enphase batteries?
Battery generations use different controls. We match the equipment for your installation before adding storage.